Custom 

MINI MAG 2800 (Two Pole Lift)

 The Mini Mag 2800 lb. Boat Lift was designed to be a user friendly solution to the problem of economically storing small boats. The 2800 attaches to two pilings along your dock or seawall. Two powerful 3/4 hp winches are utilized to raise and lower your craft leaving an open span between the motors. This low profile, open span design makes this lift very attractive and easy to use.The Mini Mag 2800’s tracks are secured to pilings with the supplied galvanized mounting hardware. The arms travel through the tracks on polypropylene rollers and are raised and lowered by stainless steel cables.Carpeted runners support and protect the bottom of your boat. A wireless remote control may be added as an option.












​Mini Mag Specifications:

Capacity:     2,800 lbs.
Arm Length:    72"
Travel Depth:  6' std., 8', 10' opt.
Required Pwr:     110 volt, 20 amp
​ Piling Spacing:    8' - 12' apart
Piling Diameter: Two 8"
Piling Height:   12" - 18" above the deck
​ Motors:   Two 3/4 HP with GFI


The "HD" model is designed to afford maximum hull support while keeping a    low profile appearance. This design allows for easy access to your vessel  because it is positioned inches away from your dock. Standard to the "HD"  model is a fully adjustable "I" beam bunking system to gently cradle your  boat. The worm gear driven winches are located on the dock* allowing for  quick and easy maintenance. An elevated outside alkway allows access to  both sides of your vessel for easy cleaning and maintenance. 

 
 HD Model Specifications
 Capacity8,000 lbs., 10,000 lbs., 12,500 lbs., 15,000 lbs., 20,000 lbs.
 Cradle Travel9' standard, opt. to 13'
 Req. Power*110 volt / 20 amp - 220* volt / 15 amp*
 Piling Diameter8" minimum
 Piling Height 18" above the deck
 Piling Spacing


    * For capacities 15,000 lbs. and less

       Magnum HD Boat Lift features:

  • GFCI protected motors
  • Molded drive enclosures
  • Complete guide pole package
  • Elevated outside walkway
  • Galvanized steel construction
  • 2/3 year warranty
  • Stainless steel cables and sheaves
  • Worm gear driven winches
  • Optional remote control
  • Optional E-gear drive 


Copyright 2014. American Boat Lifting Services. All rights reserved.

The Magnum Hybrid lift is available in the capacities of 7,000, 10,000 and 13,000 pounds.The Hybrid features a galvanized upper power beam complete with machined nylon bearing blocks. Stainless steel cables wrap on grooved aluminum winders. Power is supplied by an AquaMarine EBD drive unit.The drives  feature a  belt driven enclosed gear set with an oil bath.The gear set is driven by a GFI-protected motor all with the safety of a belt.The cradle beams, bunks and guides are all T6061 Aluminum. For those who wish to have an all galvanized lift, the Hybrid is also available as a conventional overhead style  lift with galvanized steel lift beams and timber  bunks. ​​Power is controlled by manual switches standard with radio remote available  as an option.​
​ 












Standard Specifications: 
Pile spacing on center width 13' 
Pile space length on center    12' 
​ Up and down travel    15' 
Power Requirements    110V 30A / 220V 15A

MINI MAG PWC (Jet Ski)

 The Mini Mag Personal Watercraft Lift was designed as a user friendly solution to storing your personal watercraft (PWC) or small boat.No lines to tie and no trailers needed. The Mini Mag uses forklift-like arms to raise and lower your craft from your own pier. The low profile design makes this lift very attractive. The Mini Mag is available in 800 lb. and 1,500 lb. weight capacities. Both models are available with either manual or electric winches. A radio remote control is available as an option with the electric model. The Mini Mag's track is secured to a piling with the supplied galvanized mounting hardware. The carriage travels through the track on polypropylene rollers and is raised and lowered by a stainless steel cable. Carpeted runners support and protect the bottom of the watercraft.













​ Mini Mag PWC Specifications:   

Vertical     Vertical Rotators
Capacity:   800 lbs.  1,500 lbs.   800lbs. 1,200 lbs.
​ Arm Length:   3'   5'     3'   5'
Arm Width:     2'     3'     2'     3'
Piling Reqmt:   8"dia.   8"dia.   8"dia.     8"dia.
Travel Length:   6'-8'     6'-8'   6'-8'     6'-8'

MAGNUM S

  •  Magnum S 

  •  Magnum HD

  •  Magnum Hybrid

  •  Magnum 25k- 40k

  •  Mini Mag PWC

  •  Mini Mag  2800

  • ​ Rotomag Swinger

  • ​ Boathouse Lifts

 ROTOMAG SWINGER

Securing and servicing your personal watercraft or small boat just got a little easier. The RotoMag Swinger allows you to raise your vessel, then, rotate it over the dock or the  bulkhead for easy and  safe access. The tube in a tube  design means that when raised, no portion of the lift remains in the water. Electrolysis is virtually  eliminated and no marine growth will occur on the  lifting cradle. The RotoMag Swinger is easily installed  on pilings 43" above the deck level or  higher. For  those shorter pilings that are at least 28" high, we offer any optional Stubby Mount. Standard features  include the 6 foot long runners, two guide posts, 180  degrees of rotation and 9' of cradle travel. RotoMag Swingers are available with a manual, non free wheeling safety winch or electric  winches with ground fault protected drum switch.A Gem wireless remote control with a range of 100 feet  is available as an option on electric  models.​










  General Specs
​    Minimum Piling Height - Standard Mount:  43"
    Minimum Piling Height - Stubby Mount:    28"
​   Minimum Piling Diameter:  8"
   Maximum Cradle Travel:    9'
    Power Requirements:    110V 15A Min.
   Min Wtr Dpth:   5" under the keel of the boat to be  lifted

MAGNUM HYBRID

  MAGNU​M HD

BOAT HOUSE LIFTS

 Boat House lifts are available in 3,000, 6,000, 8,000 and 10,000 pound capacities. They are available with stock cradle widths of 9’ and 10’ or with 14’ Slings.They are all designed to be mounted to overhead rafters. All MAGNUM Boat House lifts are driven by a worm gear driven flat plate drive and are suspended by  stainless steel cables.


MAGNUM 25,000HD - 40,000HD

​​The "S" model is designed to afford maximum hull support while keeping a low profile appearance. 
This design allows for easy access to your vessel because it is positioned inches away from your dock. The "S" model features a fully adjustable timber runner bunking system to gently cradle your boat. The worm gear driven winches are located on the dock, allowing for quick and easy maintenance. 
The "S" model is the most economical solution to lifting boats in canals, rivers or lakes. .​

 S Model Specifications 
Capacity8,000 lbs., 10,000 lbs.
Cradle Travel9' standard, opt. to 13'
Required Power110 volt. 20 amp - 220 volt/ 15 amp
Piling Diameter8" minimum
Piling Height

18" above

 

   A Magnum S boat lift features                                  

  • GFCI protected motors
  • Molded drive enclosures
  • Complete guide pole package
  • Outside walkway
  • Galvanized steel construction
  • 2/3 year warranty
  • Stainless steel cables and sheaves
  • Worm gear driven winches
  • Optional remote controls
  • Optional E-gear drive
​ 
  The 25K, 30K and 40K 'HD' models are designed to afford maximum  hull support   while  keeping a low profile appearance. This design allows for easy access to  your vessel  because of the open span between the  drive units. Standard to the 'HD' models are fully  adjustable "I" beam  bunking systems to gently cradle your bot. Four E-Gear driven winches positioned on top of eight pilings raise and lower the vessel. An elevated outside  walkway allows access to both  sides of your  vessel for easy  cleaning and maintenance. Remote controlled  switches with upper and lower limits are a standard feature.​

    30K and 40K 'HD' Model Specifications:

     Capacity

25,000 / 30,000 / 40,000 lbs.
     Cradle Travel15' standard
     Required Power220 volt / 40 amp
     Piling Size RequirementsEight 12" diameter
     Piling Height Above Deck4' above the deck

     Distance Between Piling Width


  Magnum 25,000HD 40,000HD features:

  • E Gears standard
  • Molded drive enclosures
  • Complete guide pole package
  • Outside walkway
  • Galvanized steel construction
  • 2/3 year warranty
  • Stainless steel cables
  • Worm gear driven winches
  • Standard remote control​